Floating Acrylic Frame

The Floating Acrylic Display Frame is a premium signage and artwork solution designed for modern galleries, high-end retail, and luxury office interiors. By elevating your graphics into the third dimension, this frame transforms standard information into a sophisticated visual statement.

                                         Installation Steps

1. Prepare Your Graphic

• Place your logo or artwork between the two acrylic panels.

• Align the pre-drilled holes in the acrylic with the corners of your graphic.

2. Mark Your Drill Points

• Hold the back acrylic panel against the wall at your desired height.

• Use your level to ensure the panel is perfectly horizontal.

• Mark the center of the four pre-drilled holes on the wall with your pencil.

3. Install the Standoff Bases

• Drill pilot holes at your pencil marks and insert wall anchors if mounting into drywall.

• Unscrew the "cap" from the standoff barrel.

• Drive the mounting screw through the standoff barrel and into the wall anchor until flush.

4. Mount the Acrylic Panels

• Hold both acrylic panels (with the graphic sandwiched inside) up to the standoff barrels.

• Insert the standoff caps through the acrylic holes and screw them into the barrels by hand.

Pro Tip: Do not over-tighten; hand-tightening is sufficient to secure the frame without stressing the acrylic.

                                          Preparation Tips

• Paper Weight: Use a heavy cardstock or semi-gloss photo paper to ensure the graphic stays flat and crisp between the two acrylic sheets.

• Double-Sided Use: Because the frame is transparent, you can place two graphics back-to-back for a double-sided display in windows or open floor plans.

• Centering: Use a small piece of clear double-sided tape in the center of the back panel to hold your graphic in place while you secure the front panel and standoffs.